Are you looking for a contractor?
Submit our quick form and get quotes now!
Table of Contents
7 min read
7 min read
Renovation tipsHow to Install a Bay Window Step-by-Step
Windows rank amongst the fundamental architectural features of a house, allowing daylight to filter in. With that in mind, bay or bow windows are a sure asset in all homes.
They’re essentially multi-purpose features, notably doubling as a reading nook, breakfast area, or lounge area (the window seat).
Moving forward with a bay window installation project requires one to be knowledgeable in construction, so if you’re a novice in the matter, recruit as many experienced individuals as you can, to lend you a helping hand with your project. With a bit of confidence and a decent skill set, we’re sure you can install the bay window of your choosing. Keep reading for step-by-step guidelines.
Source: Canva
First things first, you’ll need to determine the shape and size of the bay window you’re looking to install. If you want your bay window to be rather striking, you’ll need to build one that protrudes way out, in a sort of cantilevered fashion. Choose the angle of your window. Angles range from 45, 30, or 10 degrees; the smaller of the lot is often referred to as a bow window.
A bay window is made up of three separate window panes, which are joined to make a single, larger unit. Although the installation is similar to that of a flanged window, some significant differences should be accounted for.
We suggest asking yourself some preliminary questions prior to moving forward with such an installation project, such as: what kind of side window to use; what type of sash; and how you plan on holding the window in place. In some cases, additional support will be necessary from above or below the window, and it may be that both are required.
If you’re planning on installing a mini bay window, it likely won't require additional support. It’s also important to consider how the bay window will be finished, including whether there will be an eave above the window or whether you’ll be building or purchasing a custom-made roof.
Bear in mind that, depending on the manufacturer, you may need more or less material than listed here:
Tape measure
Drill
Sledgehammer
Level
Caulk and caulk gun
Screwdriver
Flat pry bar
Brackets
Circular saw
Window
Flashing
Roof structure
Roofing felt
Sheathing
Roofing
Roofing and finishing nails
Interior trim
Casing nails
Insulation
Once you’ve collected all of the necessary tools and materials, you can begin installing your new bay window.
Prior to cutting a hole directly in your wall, properly prepare the space in which the project will unfold. This includes removing any furniture you wish to keep dust-free or simply covering items with a tarp or two, or an old bedsheet. Also, don't forget to seal any ducts or air vents located in the room to prevent dust from seeping into them. The first step will consist of cutting the opening where your bay window will be installed.
This process will mostly depend on where in your home you plan on installing the window, the surrounding surfaces, the wall's material, as well as whether there's already a window in the spot where you’re planning to install said bay window. You may need a sledgehammer to knock down any studs found in the wall. If sheathing and siding nails are secured, cut them off using a reciprocating saw. Next, remove the sill that’s in place, as this will help you determine the window's rough opening width.
Then, frame the opening in such a way that it can accommodate the flashing. The window jambs should be fastened directly to the window's framing. Note that your bow window may have flanges. If so, temporarily position the window in the hole. Next, wedge into place using shims and mark the sides to then cut the siding.
Now, cut the siding according to the measurements taken. Make sure that the area where you will be installing the window has a levelled, flat surface. Grab a level to ensure the surface is actually level. If the space is not level, you will have to build a frame on which the window will rest.
Source: Canva
Once you’ve prepared the area, mark the location where the brackets will be secured according to the manufacturer's instructions. Drill a few holes to wedge and level the unit. This can be completed by inserting shims between the top of the frame and the rough opening. Once completed, you can temporarily position the window in the cut-out. You’ll definitely need someone to help out during this process, so rally up friends or loved ones.
However, before temporarily installing the window, cut a couple of temporary supports to fit directly underneath it. This part of the installation process is meant to check whether the unit is level, and lays flat across. Next, drive screws into the holes you’ve made so that the window can be upheld temporarily. Make sure the window's individual panes can open and close as smoothly as possible.
If you haven’t had a roof cap for your bay window manufactured, now is the time to build it. It will be much easier to make adjustments when working at ground level. If you haven’t done so already, make a template for your roof or take down the measurements so that you’re able to make it. During this phase of the process, make sure to drill holes that are big enough for the support cables should you require additional overhead support. Cut out the structure's outline in the sheathing and build the roof.
Once the roof is ready to be installed, position it and mark the spot where you'll cut the siding to allow for flashing. Once secured in place, you’ll want to form a shallow gap to add foam insulation. Make sure to insulate the space between the window frame and the wall. If you’re working with a spray foam sealant, note that it will expand to form an air barrier to keep cold air in and hot air out. Now, your bay window is ready to be finished in any way you’d like, whether that be adding decorative trim or casing.
Bay windows are considered high-end features in terms of window designs. They’re appreciated on account of their ability to provide panoramic views. Furthermore, they automatically make a room feel and look bigger. The only hitch rests in its installation cost and the fact that its installation is restricted to select areas of a home.
A bay or bow window usually costs around $2,500 and $4,000.
Find more information on different window models in our tailored guide.
There are standards relating to windows and other opening types per the Civil Code of Quebec. Indeed, it is illegal to have an unobstructed view, such as a clear-glass window or door, within 1.50 metres from your and your neighbour’s property line.
If you’re planning on installing new doors and windows or altering their size, you should request a work permit. Furthermore, you will have to abide by the regulations regarding natural lighting, ventilation, and security. The latter may not be necessary if your project solely entails replacing or repairing an identically sized window or door.
Inquire with your town hall representatives to fully understand the guidelines to follow before undertaking your renovation project.
Determine the size and shape of the window
Gather tools
Prepare the work area (remove furniture, seal ducts)
Cut out the bay window opening
Insert wedges (shims)
Secure the jambs
Cut the siding
Make sure everything is level
Build the frame (if needed)
Mark the spots where the brackets will be secured
Drill the holes to wedge and level the unit
Temporarily install the window (install temporary supports)
Build the roof
Insulate the gap between the window frame and the wall
Permanently affix the bay window
Carry out the final details
RenoQuotes.com can help you get quotes for a window project. If you submit your project to us, we’ll put you in contact with top-rated contractors. Fill in the form on the homepage (it only takes a few minutes), and you will get estimates from trusted professionals.
Last modified 2024-03-21
Looking for something else?
Related articles
The latest industry news, interviews, technologies, and resources.
RenoQuotes.com • 05 Dec 2023
A pergola is a great alternative to a traditional patio umbrella. Not only does this sunshade provide a more aesthetic appeal compared to the latter, but it also offers a wide range of options in terms of materials and sizes. On top of that, it doubles as a permanent patio lounge area, while still shielding you from the elements. Despite being exposed to Canada's harsh East Coast climate and other elements, preserving its condition for many years to come requires meticulous care and maintenance.
RenoQuotes.com • 05 Mar 2024
Installing a garage door opener can be a rather technical endeavour, but investing in one is more than worth it. Especially so when you know exactly what type of opener to choose.
Cynthia Pigeon • 07 Nov 2023
Is it high time to reroof your house? Have you now just embarked on a major DIY project and are debating between a few different roof coverings to bring your project to fruition? It's not an easy choice, especially since it’s a long-term investment and happens to be the most exposed part of your home. At this point, making a mistake isn’t an option, and you certainly don't want to have to live with a less-than-perfect result that will nag at you for the next 20 years to come.
Léa Plourde-Archer • 07 Nov 2023
In the kitchen and in the bathroom, countertops are surfaces that play a much more important role than can be imagined. Valiantly welcoming our daily actions, they are both practical and aesthetical, often being a focal point of the room's decor. Countertops are offered in a wide array of colours and materials. Prices vary widely, providing options that fit all tastes and budgets.
RenoQuotes.com • 11 Apr 2024
Over time, our tastes change and our interests expand. It’s common for this to be reflected in and around your home. Many people will turn to a large-scale home renovation or even a quick DIY clean-up or project to breathe new life into the abode. A tried and true renovation that’ll update the appearance of your home and will add some serious curb appeal is an exterior painting project.