Submit our quick form and get quotes now!
4 min read
4 min read
Interior renovationsWhat is a load-bearing wall used for and how much does it cost to remove it?
Every house has load-bearing walls that support the building's entire structure. Since working on them can be very dangerous for both your house and your personal safety, here are a few important things you should know about load bearing walls before you start renovating your house.
Load bearing walls make up the most important part of a house's structure. They support the roof, the floor and the other walls. Therefore, only professionals can safely work to remove or to modify them.
For instance, if you want to demolish a load bearing wall, they will have to add extra support beams to complete the project without affecting the building's integrity.
Afterwards, to avoid future problems, they will find a way to solidify the structure of the house. In some cases, this will be done by building another load bearing wall in another part of the house.
When building a new room or a house extension, they will add at least one steel or wood beam to support the house's different components. Creating an opening in these types of walls is also possible, but it must be done with a lot of precaution.
Check out the article How to create an opening in a load bearing wall for more information.
If the load bearing wall is inside the house, it is possible that workers will be forced to rebuild a new one, depending on what of renovation is planned.
On the other hand, if a room is being expanded, it will be necessary to install one (or more, according to the size of the room) steel beam (of type IPN) or a wood beam. These beams will support the components of the house and ensure that the floor or roof above does not collapse.
Important: do not complete this work yourself. This requires the skills and knowledge of a qualified general contractor.
Indeed, this type of project is one of 7 renovation projects that should always be left to professionals
Although at times it can be hard to identify a load-bearing wall, there are a few signs that could help you recognize them. First, these types of walls are usually very thick when compared to other walls. Another trick is to knock on the wall. If the sound is hollow, chances are it's not a load bearing wall. It's also good to know that in general, floor joists near load-bearing walls tend to be perpendicular.
Last but not least, all the outside walls of a house are usually bearing walls. If a wall contains all the characteristics that were mentioned in this paragraph, it is probably a load bearing wall. However, you should always get a second opinion from a professional.
Here are a few other characteristics that help determine whether or not a wall is load bearing:
How thick the wall is: load bearing walls are generally thicker than normal walls (minimum 15 mm);
Going up to the attic, study the direction of the beams and joists. Load bearing walls tend to cross beams in a perpendicular manner;
The wall contains large columns;
Walls that are located in the middle of the house are more likely to be load bearing walls;
For walls that are located on the ground floor, head to the basement to observe the direction of the ceiling beams.
If you decide to take the risk to remove a load bearing wall by yourself, your house could fall down after only a few knocks using a hammer or another strong tool. Since vibrations are so detrimental to load bearing walls, you should never underestimate renovations involving these types of structural elements.
That's why if you're planning to remove a load bearing wall, it's so important to hire a structural engineer or an architect to properly plan out the wall removal proceedings. Once you have the plans in hand, a general contractor will usually be able to complete the job.
Since this is a project that may lead to certain complications, the destruction of a load-bearing wall must be completed by certified contractors. Expect to spend at least $ 2,000 for good quality work (Source: AmeriSpec).
Here are a few relevant articles about interior walls that could be useful to you:
RenoQuotes.com can help you get quotes for your load bearing wall renovation project. If you submit your project to us, we’ll put you in contact with the best contractors who will be able to carry out your project with success. Fill out the form on the homepage (it only takes a few minutes), and you will receive quotes from home renovation specialists.
Last modified 2023-11-07
The latest industry news, interviews, technologies, and resources.
RenoQuotes.com • 07 Nov 2023
If you're looking to give your interior a modern look, concrete and concrete-inspired wall coverings are a great option. This article explains all the ways you can achieve a concrete look for your wall, with or without real concrete!
Léa Plourde-Archer • 07 Nov 2023
Once seen as an architectural element only used for outdoor walls and industrial spaces, the interior brick wall has turned into a new staple in Canadian homes. This material is not set to go out of style any time soon! We’ve prepared a small guide to tell you more about interior brick wall installation and maintenance:
Cynthia Pigeon • 07 Nov 2023
Mould found in homes is a common concern amongst many homeowners because of the extensive damage it can cause.
Cynthia Pigeon • 07 Nov 2023
If you suspect your home may be contaminated with asbestos, it's better to be safe than sorry. Nowadays, there are numerous ways to determine whether or not there’s asbestos in your home, so if your suspicions are correct, experts in the field can tackle your home’s decontamination.
RenoQuotes.com • 07 Nov 2023
Lacking in the idea department when it comes to choosing tiles for your tiny bathroom? Good. That means you haven’t yet entered the realm of failing to turn your snug space into a genuinely spacious-looking room.