Are you looking for a contractor?
Submit our quick form and get quotes now!
Table of Contents
5 min read
5 min read
Interior renovationsHow to Fix Door Lock Problems
Do you have a problematic front door lock? Whether this is a direct result of regular wear or an attempted break-in, there’s no doubt that you’re trying to remedy the situation as fast as possible. So here’s a rundown of the quick fixes available to you.
Source: Canva
Before we jump ahead with our list of solutions available to you, we first have to go over the probable causes of a door lock issue. Essentially, there are two:
Your door lock was tampered with: That being, your key is probably turning into nothing and your lock is without a doubt broken;
Your door lock has worn with time: If your key is inserted into the locking mechanism, but you’re unable to unlock the door, your problem is most likely caused by the device’s wear over time.
As above-mentioned, it’s not uncommon for a door lock to show signs of wear over time. This shouldn’t come as a surprise if you’ve had the same door and lock for an extended period of time. Since the impossibility of unlocking a door due to a worn locking mechanism is undoubtedly problematic, here are a few solutions available to you.
The first solution available to be able to unlock the door to your dwelling is to opt to remove the cylinder with pliers. Before proceeding, it’s best to apply a release spray to the latter, a product better known as WD-40.
Should this tip work, you’ll be able to remove this part with pliers by means of small back-and-forth motions to dislodge it from its position. Afterward, you’ll need to replace the old cylinder with a new one.
That said, it’s still important to issue two cautionary warnings regarding this procedure and the damages it could cause. In fact, if your back-and-forth motions are too sharp or forceful, you risk damaging the inside of the door lock.
As such, if you’re unsure of the degree of pressure to apply, hire an expert locksmith. Also, you have to keep in mind that this technique won’t work if your cylinder doesn’t overlap the doorframe by at least 3 mm.
If you happen to find yourself in this situation, you could also proceed by drilling into the cylinder by using the space between the cylinder and the box as support.
Nonetheless, note that this technique is also susceptible to damage your door, especially if you don’t have the correct sized drill bit (5 mm). And that’s why, when you don’t have the right tools, you should really call upon the expert skills of a professional.
Are you looking for experts for your door project?
Fill in this form to be connected with top-rated contractors!
That way, you won’t further mangle your door and have to pay to repair the damages that could have been avoided. In fact, attempting to drill unknowingly into the cylinder risks making the task at hand a lot more difficult for the locksmith whom you called for help.
Whether you’ve used said technique yourself or decided to hire a professional to handle it, note that you’ll still need to change the cylinder and the lock itself.
Let’s wrap this up by stating that there’s another option: it consists of using a lock puller. This device was specially made to remove lock cylinders from their position. Albeit using such a tool can be super useful, the reality is that its usage is typically reserved for locksmiths.
Source: Canva
Albeit we often blame the lock’s sturdiness as a result of its failing use, note that this problem is often caused by a mismeasured cylinder.
In fact, some cylinder door locks have a tendency to exceed the door. If it exceeds it by more than 3 mm, you can most likely remove it with pliers. However, it makes it easier for thieves to break in, so we strongly recommend you choose a cylinder that doesn’t overhang the side of the door.
If your door was tampered with, the deed is done, however, the good news is that no one actually broke into your home and made off with your personal belongings. Even so, clearly, this less-than-delicate manoeuvre damaged your door lock. So, what should you do?
Basically, to methods used to fix the above-mentioned problem resulting from an attempted break-in are very much the same as those you would employ to repair a faulty, worn-out door lock. Unfortunately, it might be that you’ll need to replace your door if the damages are quite extensive.
If your door is just about new, and an attempted break-in isn't the problem, it may be that your door lock isn’t the problem. In fact, a lot of factors could explain said situation. First, it may be that your door isn’t levelled with the frame. As such, the two parts that make up the locking mechanism aren’t properly aligned, thus obstructing the opening.
Second, let’s not forget about the key; it could be the root cause of your problem. As a matter of fact, if it’s a copy of the original, certain discrepancies between the original model and the copy can explain the resistance experienced when trying to turn the key into the lock.
In such a case, feel free to replace the key with a new one that’s perfectly fitted to your door lock. This will prevent you from damaging your door lock or getting your key stuck in it.
Last, if nothing seems to explain your faulty door lock, check the strike plate at the bottom of the panel. This small cavity in which the bolt is inserted can become obstructed over time due to a build-up of dirt. Check with expert locksmiths to know exactly how to proceed to clean it.
RenoQuotes.com can help you get quotes for your doors and windows project. By submitting your project, we’ll put you in contact with top-rated contractors. Fill in the form on the homepage (it only takes a few minutes), and you will get estimates from trusted professionals.
Last modified 2023-11-07
Looking for something else?
Related articles
The latest industry news, interviews, technologies, and resources.
Amanda Harvey • 07 Nov 2023
Air barriers work by blocking unwanted or escaping air movement through building cavities, preventing air leakage around your home. Further, they help to control moisture in your home, allowing water vapour that enters to diffuse back out.
RenoQuotes.com • 13 May 2024
New homes are increasingly in demand. In fact, they're very popular with young professionals looking for a modern and comfortable living space. Gone are the days of people purchasing to restore and remodel; the trend’s now set toward new construction. And it's understandable!
Cynthia Pigeon • 07 Nov 2023
For the majority of people, embarking on a renovation project is synonymous with substantial financial implications. While the level of financial investment often ensures that the end result will be satisfactory, it is nevertheless possible to achieve the desired results on a smaller budget, without having to compromise in terms of quality and aesthetic value.
N/A • 07 Nov 2023
You may be of the mind that renovation is renovation. When considering the end result, this is the case but when it comes to the process itself, there are many different factors that weigh in. If you’re currently living in a condo and wanting to renovate, you’ll face certain limitations, possibilities and strategies for approaching it. In this article, we’re going to look at a condo kitchen renovation and all of what you should consider when renovating this space. This will help you to avoid unwanted surprises during the process.
RenoQuotes.com • 07 Nov 2023
While a laundry room is, first and foremost, a space designed for practical use, and its aesthetic aspect is often neglected, one shouldn’t overlook the overall appearance of the often-forgotten space to fine-tune it to the rest of the house. With this in mind, here are décor suggestions for your new laundry room.