Submit our quick form and get quotes now!
3 min read
3 min read
Interior renovationsHow to install French doors: Step by Step
If you’re looking to let a little bit of light in between two otherwise dull or dingy rooms, or you’re looking for an alternative to the classic sliding door, then you might be in the market for French doors. These doors can be a beautiful addition to both classic and modern home décors.
However, installing French doors isn’t the easiest task. In fact, there is a bit of skill involved when it comes to the process. Of course, with a little bit of perseverance and hard work, it is easy to accomplish most things in the realm of home renovation. So, if you’re interested in doing so, read on for all of the step-by-step instructions for installing French doors.
Photo: Deposit photo
A wonderful accent to add character and dignity to an interior or exterior of a home, French doors are a pair of doors which are generally equipped with glass panes for most of their length. These doors are unique in that they open outwardly, and close towards one another to form a barrier. In some cases, French doors were considered a safety hazard. But, by way of modern advancements, this is no longer the case. Although they used to be reserved for outdoor spaces, such as the patio, they are now widely used for the interior of homes. As mentioned, installing French doors is a bit of a complex process, and you’ll likely need an extra set of hands for the process.
Firstly, the list of the materials you’ll need is as follows:
Tape measure;
Hammer;
Power drill;
Regular drill bit;
Paddle bit;
Hole saw;
Philips-head screwdriver;
Pry bars;
Carpenter's square;
Chisel;
Flush cutting saw;
Rubber mallet;
Level (long in length);
Safety glasses;
Nails;
Screws;
Shims.
You will also need a French door kit and all of the necessary hardware, including doorknobs and latches.
Start by removing the old door frame. For this job, you will require the assistance of a hammer and a pry bar as they will help you to avoid damaging the frame that’s in place. It is recommended that you label the trim pieces after removal, as this will help you to decipher where each one will go following their reinstallation.
Using a level as well as a carpenter's square, check the opening of the space where you plan to put your French doors, making sure you have squared it off. Make sure not to skip this step, as paying close attention to these details will make the installation process much easier.
To install the new door frame, hold it up in place and make sure it is level. Use shims to firm it up into place, drilling pilot holes through both the frame and the shims. Following this, drill or drive nails in just deep enough to hold the frame in place.
source: pixabay
Now, test fit the new doors to make sure that they remain snuggly in place. It is important to do this step before securing the frame permanently, as you’ll need the doors to be flush with one another while hanging above your floors at the correct height. Make any adjustments necessary, ensuring that the doors open and close correctly.
If you find that everything fits plumb in place, you can now secure the frame permanently. This job can be done using the proper screws for the material of your French doors. Once the door frames are in place, you can allow the doors to hang. Finally, install the hardware that you’ve chosen, or which came alongside your kit. For this part of the process, follow the instructions provided by the manufacturer.
For more information about interior doors, see:
RenoQuotes.com can help you get quotes for. By submitting your French door renovation project to us, we’ll put you in contact with top-rated contractors. Fill in the form on the homepage (it only takes a few minutes), and you will get estimates from certified professionals.
Last modified 2023-11-07
The latest industry news, interviews, technologies, and resources.
RenoQuotes.com • 07 Dec 2023
Choosing bathroom furniture involves more than just considering the style or vibe you’re looking to convey inside this enclosed space. While this aspect of it is important, suffice it to say, there are other factors to take into account, like your budget and the space available.
RenoQuotes.com • 07 Nov 2023
You may have purchased an old house with an equally aged structure. Despite completing renovation work over the years, it’s still likely that the household plumbing pipes are visible. So, the question is, how can you make exposed piping more aesthetically pleasing? Here are five hacks to conceal your plumbing or make it a little more visually appealing.
Karine Dutemple • 07 Nov 2023
Both durable and resistant, bamboo flooring is an interesting alternative to hardwood. Even though it’s attracting more and more attention and gaining in popularity, we have to outline how important it is to take some precautions concerning its installation to be able to benefit from its qualities.
Léa Plourde-Archer • 07 Nov 2023
In an ideal world, each home would be equipped with at least one big and bright bathroom. However, such is not the case in most dwellings. Some homes only have the ability to contain a small bathroom, and in these instances, it’s important to work with what you’ve got. Of course, this doesn’t mean that renovating your small bathroom won’t lead to spectacular results. In fact, a small bathroom renovation can have a huge impact on comfort and design.