Submit our quick form and get quotes now!
4 min read
4 min read
Exterior renovationsHow to Replace a Damaged Brick
Have you noticed that something just doesn’t look right on your brick wall? Has it seen better days? In the following article, RenoQuotes.com will explain how to replace a brick on your exterior brick wall.
In this article, we will present the steps to follow to replace worn-out bricks. It should be noted that this type of project is not recommended for beginners who have never done any manual work. It is also strongly recommended that experts be brought in to make a diagnosis as to what may have caused the damage to the bricks. Who knows? Maybe you've got a bulging wall situation on your hands? If this is the case, the replacement process presented below will not provide a long-term solution.
Despite this note, it is still useful to know how to proceed, especially when you receive a confirmation that you only have to replace some bricks.
Have you decided to go ahead with your brick replacement project? Here is the equipment you will need to collect:
Protective equipment (gloves, glasses);
Drill;
Chisel;
Trowel;
Hammer;
Wire brush;
Brush;
Sponges;
Sealing mortar.
Once you have identified the bricks that need to be replaced, you will have to remove them from the wall. Don’t forget to wear gloves and protective glasses while completing the job.
First of all, you’ll have to use a drill to puncture holes inside the mortar that surrounds the damaged bricks. These holes should be a few centimetres deep and should be set according to a regular pattern. Next, using a chisel and a hammer, dig the mortar around the bricks. Once you have removed most of the mortar, remove the damaged bricks. Always work in the most delicate manner you can manage. If needed, use masonry scissors.
Now empty, the place where the damaged bricks used to be will require a proper cleaning and smoothing process before going on to the next step. Use a metallic brush to clean out the surfaces. This step is extremely important as it will contribute to the fact that you will not run into problems when installing the new bricks.
Next, use a hand brush to clean out the cavity. Don’t forget to use a wet sponge in order to humidify all the surfaces around the area where the brick(s) will be. This will serve to ensure that the new mortar you will apply will stick.
If, when you turn over the old bricks, you notice that some of them are intact on the unexposed side, you could reuse them. However, if both sides are damaged, replace them with new bricks that have the same shape and colour.
Be sure to humidify the bricks before you put them in. You can use grouting mortar (also known as anchoring mortar) to stick the bricks to the surface. This product requires you to mix the powdered grouting mortar with water, which you must stir until you obtain a homogenous mix. You will then have to spread the product on the backside of the brick. Do not apply grouting mortar on the face that will be visible on the wall.
After having prepared your bricks, slowly start placing them in the empty spaces. Make sure that they are well aligned with the others. Using your trowel, shape the joints so they match the others, as this will give an optimal result. When you have completed each step of the process, remove the extra mortar. Lastly, don’t forget to clean up the surface using a wet sponge. Congratulations, you’ve replaced your damaged bricks!
For a professional, high-quality result, hire a mason for your masonry renovation project.
For a professional result, do not hesitate to contact a masonry specialist for your renovation project. On average, the replacement of deteriorated bricks costs between $24-38/linear foot (price is indicative and subject to change).
RenoQuotes.com can help you get quotes from qualified masons and renovation contractors for your interior brick wall. If you submit your project to us, we’ll put you in contact with the best masons in our contractor network. Fill in the form on (it only takes a few minutes), and you will receive quotes from qualified masons and home renovation companies.
Last modified 2023-11-07
The latest industry news, interviews, technologies, and resources.
N/A • 07 Nov 2023
With city populations growing rapidly, and space becoming dense and limited, many are choosing to live in a townhouse or condo in lieu of more traditional housing choices. There are plenty of benefits to townhouse and condo living, but what are the rules and regulations for those interested in renovating?
RenoQuotes.com • 06 Dec 2023
Your house may be running out of space, but why leave the ideal setting where your kids grew up? Since moving out is off the table, building onto your family home becomes mandatory. If you happen to find yourself in this situation, you’ve definitely come to the right place! Our article will detail everything you need to know about building an extension onto your house.
RenoQuotes.com • 07 Nov 2023
Becoming a boilermaker means working for the aeronautical and aerospace industry, for petrochemical companies, within the nuclear and cryogenic fields, with renewable energy, and more.
RenoQuotes.com • 07 Nov 2023
Has the time come to change your patio door? Given that you will have to live with it for many years to come, you definitely do not want to regret your choice.
Cynthia Pigeon • 07 Nov 2023
With the new year ahead, major developments are being ushered into the renovation industry.