Submit our quick form and get quotes now!
5 min read
5 min read
Wall coveringsHow to Install Wall Panels
Wall panels are a wonderful feature for the home, and they come in a variety of materials, shapes, styles and colours. Therefore, they can be used alongside almost any home decor, made to suit the needs of any homeowner. Panelling can cover an entire wall, or just half if you so choose. Installing wall panelling is a DIY project that can be easily accomplished with the right steps and the options are endless!
If you’re a homeowner with a reduced budget, all you require is careful planning and a little bit of energy to complete this project. Plus, we’ve got the step-by-step guide to help you successfully achieve it. So, read on and soon enough you’ll have brand new panelling installed on the walls of your home.
source: Flickr, MyWallArt
Depending on the materials you choose, the installation process will vary slightly. But of course, the first step is choosing and collecting these materials. The style of panelling you decide on will have a significant impact on the room, as well as the rest of your home, so make sure to consider the style of your entire home.
A home with traditional properties would suit Victorian or Georgian panelling, whereas a home with a classic look and cleaner lines will require something minimal. Panelling generally comes in board or sheet form, again greatly depending on the material. Remember to keep this in mind when thinking about how much you must buy.
To prepare for the installation, homeowners should first measure the area you'd be hoping to cover. This will determine how much material you’ll need. As we have mentioned, the method of measuring will depend on the panels you choose, and how they're sold. If there are doors, windows or other devices in the way, subtract these areas and think about the ways that the panels will hug around them.
Also, take note of where sockets, switches, and wall lights are located, and how they will be refitted into the panelling. Panels will need to be spaced evenly apart, and the width will depend on the length of the wall you are covering. Homeowners will want their panels to create a uniform effect, so consider working within a space that will allow for this.
Also, think about finishes you may need to do alongside your panels. Dado rails are often offered alongside certain types of panelling, fitting on top to finish off the edge. Shelving is another option to consider for a uniform finish.
Once materials have been gathered, lay these materials on the floor to match them up and make sure they align correctly. If you are working with wood panelling, bear in mind that wood expands and contracts depending on the temperature. Therefore, wait until wood panelling has reached a neutral temperature before moving forward with an installation. Bear in mind that this will sometimes take between 2 and 5 days depending on your region's climate.
Before installing the panels, make any necessary repairs as homeowners will want to ensure that the wall is even and flush so that panels can be installed smoothly. If there are any protruding surface materials, remove these and seal any holes in the wall. Now, locate the placement of the studs in the wall and use a pencil to mark their location.
If necessary, furring strips can be attached to the studs to provide a space for nailing the wall panels but must be flat to ensure that the panels will lay flat. If you are installing panels on a framed wall, studs should be spaced properly apart. Also, make sure to remove moulding, trim as well as fixtures that might get in the way of the panelling installation. Save any moulding or trim that you may need to reinstall following the panelling installation. To avoid electrocution or injury, turn off all electricity before moving forward with the project.
source: Logo
After preparing the wall, and marking the placement of the studs, plan for the installation to start at the left side of the area where you’re attaching the wall panels. There are a few diverse ways that you can go about installing the panels, and this will come down to the style of panelling that you’re installing.
A common method is to install panels with an adhesive or glue. If you are working with glue, apply it to the backs of panels in a zigzag pattern, and use pins to hold them in place as they dry. Make sure to leave space between each panel, approximately 1mm, as certain materials may expand while they dry.
As soon as the glue dries, remove the pins or counter stick them. Following this, lightly nail panels at the top, further securing them into the wall. If you are working with wood panels, lightly tap the bottoms with a hammer to further secure the glue.
Next, drive nails into the panels, approximately every four to eight inches. Follow manufacturers' instructions regarding what type of nails would be best for your wall panels. Depending on the material you are working with, nails will be visible, so make sure that they are spaced to appear aesthetically pleasing.
Also, when nailing panels into place, work from one end to the other, as nailing from side to side can cause pockets to form in the material. Be gentle when driving nails in, as being too rough will cause damage to the panel surface. To finish, countersink and putty nails.
Depending on the type of panelling, replace or add new moulding around floor or ceiling to complete the project. Glue and nail the moulding in place, using finishing nails. If you are working with wood panelling, use wood putty to cover over nails. Hopefully, once this job is complete, you will have some stunning results to admire over.
RenoQuotes.com will put you in contact with 3 reliable contractors for your wall panelling project. Fill in the form on our homepage (it only takes a few minutes), and you will receive quotes from trusted professionals.
Last modified 2023-11-07
The latest industry news, interviews, technologies, and resources.
RenoQuotes.com • 07 Nov 2023
Concrete panels are durable, cost-effective, and viable options for both indoor and outdoor walls. Their list of attributes doesn’t end here: they're also easy to install, especially aesthetic-looking, thermal insulators, and soundproof. We’ll delve into why and how these panels should be installed.
Amanda Harvey • 07 Nov 2023
It has become common to preserve and experiment with concrete surfaces both inside and outside of the home. Modern homeowners are exploring the possibilities of painting concrete, offering an alternative to its more commonly known drab shades of grey.
RenoQuotes.com • 07 Nov 2023
Whether for your growing family, for the arrival of a long-term house guest, or simply due to a lack of space, the reasons behind building a home addition are plentiful. Amongst the many possible solutions presented to those wishing to build a home extension, there is the home addition on screw piles.
RenoQuotes.com • 08 Mar 2024
Aside from the shower, the toilet consumes the most water out of all household appliances. Households with multiple toilets consume gallons of water every day, watching it literally wash down the drain.
N/A • 07 Nov 2023
Eco-paving is a technique that consists of paving road surfaces with recycled rubber instead of asphalt. Learn more about eco-paving, as well as its advantages, cost, and eco-friendly nature so that you can use it with complete confidence.