Submit our quick form and get quotes now!
4 min read
4 min read
Interior renovationsHow to Apply Drywall Joint Compound
Applying drywall joint compound is an art that requires patience and meticulousness. Contrary to other types of renovation projects, this task is accessible to anyone. However, in order to ensure good results, it is important to follow certain guidelines.
The job will last at least 4 days, as three separate coats of drywall compound will have to be applied, with an 18 to 24 hour waiting period between each coat. If you are inexperienced, you will have to work more slowly to apply the product in the right way.
Spatula;
Two trowels (different sizes);
Drywall tape;
Platter or any flat-surfaced object (to mix the drywall compound);
Drywall compound;
Sandpaper;
Sanding block and sponge;
Personal protection equipment (mask, gloves);
Washcloths;
Container filled with tepid water.
Start by emptying the room where you will be working and protecting the surfaces that cannot be removed. It is also recommended that you cover the furniture in rooms nearby, as the dust has a way of spreading around.
If necessary, install metal corner beads, which will serve to unite gypsum panels that meet at the exterior corner of two wall sections (see the photo below). Be careful not to nail or screw them in too tightly, as this could cause them to warp.
Photo: Today's homeowner
Put a little bit of the drywall compound on your platter. Next, using your trowel (the smaller one), take a bit of the drywall compound. Starting from the middle part of the joint, spread the product over the whole gap. Once you have covered the complete section, install some drywall tape.
Stretch the paper as much as possible and spread a small coat of drywall compound on top, whilst carefully pressing on the paper to create a nice homogenous surface. As you complete this part of the process, be sure to remove any extra compound that has gathered on the sides. Repeat this operation until you have covered each one of the joints. Once you have finished applying the first coat, inspect the whole area and remove any excess compound.
Photo: Flickr- Georgia National Guard
Before you start working on the second coat, sand the joints very carefully, making sure not to perforate the drywall tape. For the upcoming steps, we recommend that you use a larger trowel that will serve to eliminate marks and delineations. Apply thin coats and don’t forget to clean your tools after each use.
* Notes: If the drywall joint compound is too dense, you can dilute it using a small quantity of tepid water. Be careful with air bubbles that tend to form behind the tape. If bubbles appear, the joint will have to be redone.
The previous instructions mostly applied to “standard” joints. However, interior wall corners don’t exactly work the same way. You’ll have to be very careful in trying to avoid drywall compound accumulation in these corners. Spread the joint compound on both sides of the corner.
Next, fold the drywall tape in two and install it in the corner, starting from the top. Press firmly, using your trowel and make sure that both sides are even. For the next two coats, follow the same instructions as written in the paragraph above. In places where there are screws, insert a bit of drywall compound directly into the holes. Press strongly to even out the product.
Once the last coat has had the time to dry, it’s time to work on giving these joints a nice finish. Using your sanding tools, try to even out the surfaces in order to get a nice, smooth result.
After you’ve finished sanding the joints, you’ll be left with plenty of dust throughout the room. Before you start vacuuming, start the cleaning process by removing most of the dust with a broom and a wet cloth. Since the dust particles are extremely small, they may end up clogging your vacuum cleaner so it’s best to use it as little as possible. Once you’re done cleaning, you’ll be ready to start painting!
RenoQuotes.com will put you in contact with 3 reliable contractors for your drywall plastering project. Fill in the form on our homepage (it only takes a few minutes), and you will receive quotes from trusted professionals.
Last modified 2023-11-07
The latest industry news, interviews, technologies, and resources.
RenoQuotes.com • 15 Apr 2024
Are you yearning for the ultimate outdoor experience this summer? Look no further than a patio or balcony awning, a perfect solution that fulfills both your practical requirements and aesthetic desires. By selecting the perfect model, you can revel in its multitude of advantages, basking in shade and protection from the scorching sun during heatwaves, while also reaping the benefits indoors as your AC unit enjoys a well-deserved respite.
RenoQuotes.com • 07 Nov 2023
One of the most beloved rooms of the home is definitely the kitchen. This is a place to spend mornings, afternoons and evenings with friends and loved ones cooking and entertaining.
Christime Simard • 07 Nov 2023
When renting an apartment, either with roommates or by yourself, the bedroom quickly becomes our safe space. Not only does it reflect our taste, but also our personality and interests. However, even if your decor is perfectly curated, you might still want a new look after a while.
N/A • 07 Nov 2023
We often hear about green homes. But did you know there are also green building sites? A construction or renovation project is a serious source of pollution.
N/A • 07 Nov 2023
Shopping for new home decor can be a tedious process: you’re looking for savings, locally-made products, value for money, etc. One of the aspects that stands out today, especially during the last few months, is the sudden interest associated with nurturing small, local businesses.