Submit our quick form and get quotes now!
6 min read
6 min read
FlooringAsh Hardwood Flooring: Installation & Maintenance Tips
You are renovating your home and now comes the time to change your floors. After careful consideration, you choose a rather classic, hardwood that adds light and character to your main living area: ash. This type of wood is an ideal choice as it constitutes a wise investment given it is cost-effective and durable.
With its coarse grain, ash offers both strength and flexibility; ideal for the busy and bustling family or pet lovers. Its features are also beneficial for those who do not have a lot of time to devote to an elaborate maintenance routine or who wish to install this type of flooring in a commercial space.
To determine the amount of wood needed, measure the area you wish to cover by multiplying the length by the width, round out the number, and add a little extra for good measure. This way, you will not end up faced with a less-than-beautiful result or uneven floorboards.
Most companies, when you order or purchase your set of floorboards, will throw in labour. To save time or if you do not feel comfortable doing it yourself, note that the staff is experienced and qualified. However, if you do decide to take a different route, and tackle the project yourself, remember to adhere to the manufacturer's installation guidelines.
Photo: Flickr
Before installing your hardwood floors, make sure that the room temperature is around 20 degrees and that the humidity level is between 40% and 50%. Then, leave the floorboards in the room where they will be installed for 48 hours to allow the ash hardwood to settle and absorb the room’s humidity. In doing so, the boards will expand to their normal size, and avoid swelling or cracking within a few days of their installation.
Also, you can purchase floorboards with or without an existing finishing coat. For the latter, following their installation, they will need to be sanded, sealed, and stained.
A hardwood floor, as is the case with ash, is generally installed on ¾-inch thick plywood planks covered with a vapour barrier.
First and foremost, have the right tools handy:
Measuring tape;
Crowbar;
Rubber mallet;
Hammer;
Steel square;
Wood flooring stapler;
Mitre saw;
Drill;
Nail setters;
Flooring finishing nails;
Repair markers;
Chalkline and pencil;
Security goggles;
Knee pads;
Broom or vacuum.
Test out your tools on a scrap piece of wood beforehand to familiarize yourself with their grip, weight, and required pressure.
Also, make sure that your drill bits are smaller than your finishing nails.
Choose the straightest, most flawless wood slats for your first two rows. Normally, boards fit together on the tongue side and into the groove. Start by laying your rows using different board lengths to ensure that the ends of your slats do not line up from one row to the next; the goal is to stagger the end joints.
To secure your boards in place, pre-drill holes where your finishing nails will fit (on the top of the board), and pre-drill your flooring nails 45 degrees along the top of the tongue side floorboards. Then, hammer the nails in, and conceal the hole with a touch-up marker. Note that it is best to use a pneumatic flooring nailer to avoid splitting the wood or setting the nails at the wrong angle. Follow the manufacturer's instructions for nail and wall spacing.
When completed, lay your baseboards, quarter rounds, and door jambs by nailing them into the wall, not the floor.
For more detailed instructions, check out our article: Cherry Hardwood Flooring: Installation and Maintenance Tips.
No doubt, ash hardwood flooring will not last forever. Years of wear and tear, sun exposure, and repeated shocks due to daily life will wreak havoc on them. However, by following a strict maintenance routine, you may be able to prolong durability, especially since this tree species are already endangered due to the emerald ash borer (French only).
Note: Oak and ash hardwood floors are among the most common types of flooring and, given their similar colours, ranging from creamy white to dark brown, they are rather hard to differentiate. Also, over time, both species tend to turn yellow or orange. That being said, you can easily refinish every other room in your home by choosing the option that appeals to you most, even if one is made of oak and the other of ash.
The precautionary measures to take will depend on the type of floor finish you have. Varnish offers better protection and you can polish your floors without damaging them too much over a period of 10 to 15 years. However, when your floors start to show signs of wear and tear, call in a team of professionals to completely sand and refinish your floors.
As for oiled wood floors, this type of flooring requires regular maintenance and is much more susceptible to wear. On the flip side, you can easily apply touch-ups once signs of wear and tear begin to show. And, theoretically, well-oiled wood floors will not need imminent sanding. Also, some prefer the more natural look that oil on wood offers.
Are you looking for a cost estimate for your flooring project? Try out our cost calculator!
Photo: Pixabay
For a quick clean, use a microfibre cloth or a regular cloth on your floors as a broom might just spread the dirt and dust around, and a vacuum can damage your ash hardwood floors. As a matter of fact, avoid using any scrubby tools/materials like steel wool.
A good cleaning product is designed specifically for hardwood floors, is non-abrasive, and does not require rinsing. It is quick-drying and leaves no residue. Avoid pouring products directly on hardwood floors and do not use large quantities of water, since humidity and water are wood's worst enemies.
Avoid: Vinegar, citrus, oil-based soaps, or wax cleaning products, these are best used on vinyl or ceramic flooring.
Make sure to wipe up any liquid on your floors right away. Have doormats or rugs in your entryway to avoid any outside debris from spreading around and scratching your floorboards. Stick felt pads under your chairs and carpets under any rolling furniture.
And, of course, do not hesitate to seek professional advice, as for every type and species of wood, there is an effective maintenance method to keep them looking shiny for years.
If you want to learn more about other wood species, check out these articles:
RenoQuotes.com can help you get quotes for your ash floor renovation project. By submitting your project, we’ll put you in contact with top-rated contractors. Fill in the form on the homepage (it only takes a few minutes), and you will get estimates from trusted professionals.
Last modified 2023-11-07
The latest industry news, interviews, technologies, and resources.
Christime Simard • 07 Nov 2023
We finally made it and reached the end of December, the final month of the year 2020. Now, as much as things won’t magically fix themselves on December 31st at 11:59 pm, there’s a sort of comfort knowing we’re finally closing the chapter on what was this long and exhausting year and moving on with our lives.
Léa Plourde-Archer • 15 Apr 2024
After having published hundreds of articles on our home renovation blog, we have gathered all the information pertaining to prices in order to create a document that will be useful during renovation projects. These prices are for information purposes only and may vary according to several factors.
Cynthia Pigeon • 07 Nov 2023
Clearly, the term “weep hole” is not something you hear on a daily basis. If you were to ask those around you, people are more likely to let their imagination run wild, drawing a connection between the verb weep and the noun hole. And yet, a weep hole does not pertain to weeping in the slightest.
RenoQuotes.com • 28 Feb 2024
Bill 51—an Act to modernize the construction industry—is a legislative proposal slated to bring significant reform in the construction industry. Following a period of understanding its background and basic principles, it’s rather difficult to determine whether this proposed legislation will reach its intended purpose or if it’ll simply negatively impact the lives of a part of the province’s workforce.
Cynthia Pigeon • 07 Nov 2023
Besides opening up to the outside world, windows in a home also help maintain that precious warmth we so desperately crave during the winter months. When it is time to replace them, it is also important to consider the appropriate type of framing that will both meet your aesthetic and thermal needs.