Are you looking for a contractor?
Submit our quick form and get quotes now!
Table of Contents
4 min read
4 min read
Interior renovationsHow to Build a Staircase
Building a staircase is somewhat of an art form. In fact, a staircase is an architectural feature distinguished by its design. Whether it’s made of wrought iron, wood, concrete, or steel, it has led many skilled professionals to create real masterpieces.
Prior to building a staircase, one must draw up a detailed plan or blueprint to know the exact measurements of the stairwell, number and height of risers, and number and depth of treads. This article will focus specifically on how to build a staircase, on paper that is.
Source: Canva
No surprise here, but there are different types of staircases. In Canada, the National Building Code has established a set of regulations to ensure all staircases are built safely. You can also peruse a document issued by Canada Mortgage and Housing Corporation to gain knowledge about the different types of staircase configurations, or you can check out our article 7 Unique Staircase Designs for Your Home.
Source: https://commons.wikimedia.org/wiki/File%3ATerminologie_escalier.png
There are numerous staircase building methods, whether it be regarding their configuration or choice of materials. However, there are certain standards to follow during the building process.
Going (run): must be 8 ¼ in. and 14 in. nosing to nosing (210 mm - 355 mm);
Rise: must be between 5 in. and 8 in., from the top surface of the step to the top surface of the step above (125 mm - 200 mm);
Depth of tread: must be between 9 ¼ in. and 13 15/16 in. (235 mm - 355 mm);
Height of riser: must be between 7 in. and 7 7/8 in. (178 mm - 225 mm). Board that forms the back portion of the step;
Headroom: minimum clearance of 1.95 m (6 ft. 5 in.) from the nosing to the ceiling;
Nosing: at least an inch;
Width of landing: at least 34 in. (863 mm) wall to wall;
Length of landing: at least 33 7/8 in. (860 mm) wall to wall.
The ideal measurements for a run and riser are 9 ¾ inches and 7 inches, respectively. However, consider the headroom to ensure the staircase meets regulations and is safe to use by occupants.
Source: Canva
To build a staircase, you first have to determine the number of steps needed. If you’re in the prep stage of designing the blueprints, that’ll allow you to adjust your plans to meet standards. If you’re working towards replacing a staircase, you can take the measurements for the new staircase on-site. Whether the purpose is renovating an existing staircase or building a new one, the measurements are the same and are applicable for all staircase types.
Figuring out the number of risers needed will allow you to determine the right height for each and help you meet standards.
Formula 1: Number of risers = Height of staircase / Height of ideal step
Note: If the answer is 14.34, round down to 14 risers, since you can’t have 0.34 risers.
Formula 2: Height of riser = Height of staircase / Number of risers
Note: Given that the answer will be the height of the tread, make sure it meets standards.
Once you’ve figured out the risers, you can now move on to calculating the treads. For the latter, you’ll know whether the stairwell is big enough, or too small.
Formula 3: Number of treads = Length of staircase / Width of ideal tread
Note: If the answer is 15.44, round down to 15 since you can’t have 0.44 treads.
Formula 4: Depth of tread = Length of staircase / Number of steps (rounded number)
Note: The answer indicates the depth of each tread. Check to make sure the value meets the minimum requirements.
Once you’ve determined the right amount of treads and risers, you can go ahead and prepare your blueprint. Furthermore, you’ll have to ensure your staircase is compliant in terms of headroom. The minimum headroom is 6 feet, 5 inches. The latter was determined based on individuals of tall stature, ensuring they can use the stairs without banging their heads.
Begin by tracing an imaginary continuous diagonal line from the edge of the tread nosing to establish the starting point. Next, measure from the nosing to the ceiling to assess headroom clearance. If it falls short of the required standard, you can either increase the size of the stairwell or reevaluate the treads and risers again to find the perfect formula.
A staircase needs sturdy support. Typically, when building a wooden staircase, 2” x 12” boards are used to support the structure. These boards are doubled on either side of the staircase and affixed to the walls to ensure a sturdy structure. If your staircase is wider than 34 in. (860 mm), you can affix another stringer to the middle section of the structure to enhance its load-bearing capacity. Make sure the balusters are no more than 4 inches apart.
As for the handrail, it must be installed at least 32 to 38 in. (800 to 965 mm) off the staircase nosing. Make sure the handrail is installed at a consistent height, from top to bottom.
As you’ve probably gathered, there are several factors to consider when building a staircase. Since it’s an accident-prone installation, it’s best if a skilled and qualified contractor carries out the installation. Once on-site, the contractor will assess the situation, measure and calculate every component to ensure a safe and compliant installation.
RenoQuotes.com can help you get quotes for your staircase renovation project. By submitting your project, we’ll put you in contact with top-rated contractors. Fill in the form on the homepage (it only takes a few minutes) and get estimates from trusted professionals.
Last modified 2023-11-07
Looking for something else?
Related articles
The latest industry news, interviews, technologies, and resources.
N/A • 07 Nov 2023
Homeowners are often exploring ways in which they can use sustainable or alternative methods to heat and cool their homes. It should come as no surprise that heat from the earth can be used as an alternate energy source. This energy source is referred to as geothermal, and can be found right in your backyard. Modern homes are tapping into this affordable and sustainable source, utilizing it for their heating and cooling systems. But what exactly is it?
Léa Plourde-Archer • 07 Nov 2023
The attic is one of those parts of the house that we tend to forget. Like they say, out of sight, out of mind. Yet the things that go on up there can end up having a concrete effect on numerous elements that affect us on a daily basis. To gain a better understanding of how important attic insulation is, RenoQuotes.com has prepared a brief presentation on the subject:
RenoQuotes.com • 15 Nov 2023
Nothing compares to immersing yourself in a great book in the comfort of your home, nestled in a cozy and perfectly designed reading nook. Whether it’s next to a window overlooking the backyard or a cozy spot near the fireplace, creating a customized reading nook may be the missing link that ties your home's design together. No matter your home’s layout, whether it be a small house or a spacious loft, of modern or traditional design, you’ll find the best-suited solution for you below. Here are 10 inspiring ways to transform a corner of your house into a genuine, tranquil literary sanctuary. From the simplest of designs to the more luxurious options, the following ideas can be adapted to all home sizes and styles, creating a dedicated reading space that mirrors your personality and lifestyle.
Amanda Harvey • 03 May 2024
Today, it feels impossible to get a moment of silence. Especially if you’re not living alone, or your current abode is one of those trending condos. Whatever the case, homeowners and renters alike would love to infuse a little bit of peace and quiet into their lives. Unfortunately, we can’t control the sound coming from those around us.
N/A • 07 Nov 2023
Hello, and welcome back to our monthly entry about the best articles on interior design, decor and renovations! If you are new to this series, here is a quick recap: each month, we dedicate ourselves to finding the best articles on the internet to inspire you in your design and renovation projects.